Black Sparkle Silver Strip Panels, 200mm x 2700mm x 5mm PVC
These black sparkle silver strip panels are high gloss PVC wet wall panels, each 200mm wide, 2700mm long and 5mm thick, in a deep black with fine sparkle and two silver strips running down every panel. As the photos show, they give a bathroom a bold, glamorous look against white basins, toilets and chrome taps.
The panels fit together with a tongue and groove joint, need no grout, and are Class 1 fire rated, as the listing states. A wipe with a damp cloth keeps the high gloss finish looking new.

Key features of the black sparkle silver strip panels
- Size: 200mm x 2700mm x 5mm per panel
- Material: PVC
- Colour: black sparkle with two silver strips
- Finish: high gloss
- Joint: tongue and groove
- Fire rating: Class 1
- Coverage: 0.54 square metres per panel (0.2m x 2.7m)

The black sparkle look
Black sparkle panels have the look of polished black stone flecked with glitter, and the two silver strips on each panel add the effect of narrow tiles or grout lines without any real grout. Black walls lined with black sparkle silver strip panels make white sanitaryware stand out, and they suit chrome or brushed steel taps, mirrored cabinets and good lighting, which brings out the sparkle.

Panel size and coverage
Each panel is 200mm wide and 2700mm long, so one panel covers 0.54 square metres. The 2700mm length is tall enough to run from floor to ceiling in most rooms, or from the top of a bath to the ceiling, without a horizontal joint. Trim the panel to height with a fine-toothed saw or a sharp knife, cutting from the decorative face.

How many panels do I need?
Measure the width of each wall in millimetres and divide by 200 to find the number of panels, rounding up to a whole panel. A 1.6 metre wall needs eight panels, for example. Add around ten per cent for cutting around windows, pipes and corners, and order everything in one go so all the black sparkle silver strip panels come from the same batch.
Tongue and groove fitting
Each panel slots into the next with a tongue and groove joint, so the wall goes up quickly without tile spacers or grout. Start in a corner, check the first panel is upright with a spirit level, fix it to the wall or to battens as the adhesive or fixing instructions advise, and work across, pushing each panel firmly into the groove of the last.
Sealing around baths and showers
Around a bath or shower tray, run a continuous bead of sanitary silicone where the panels meet, so water cannot get behind them. Use trims or silicone at internal and external corners and along the ceiling for a neat finish. Browse our wet wall panels for more colours and sizes, including wider panels for showers.
No grout to clean
Grout lines between tiles collect soap scum, discolour and grow mould over time. With black sparkle silver strip panels there is no grout at all, so there is nothing to scrub or regrout. Wipe the panels with a soft, damp cloth and a little mild detergent, and avoid abrasive pads and harsh solvents that could dull the high gloss.
Preparing the wall
Before fitting black sparkle silver strip panels, make sure the wall is flat, sound and dry. Remove loose paint or wallpaper, fill large holes, and check the wall with a straight edge; where it is uneven, fix timber battens first and fit the panels to the battens. Turn off the water and electricity before you work around pipes, sockets or switches.
Styling ideas
Black sparkle walls look striking with white sanitaryware, a white or grey vanity unit and chrome taps, as in the photos. Add a large mirror and bright, cool lighting to make the sparkle shine, and keep towels and accessories simple in white, grey or silver. In a small bathroom, panel one feature wall with black sparkle silver strip panels and paint the rest in a light colour to keep the room feeling open.
Where to use them
Use the panels on bathroom and en suite walls, around a bath, in a cloakroom or utility room, or as a feature wall behind a basin. They are also a quick way to cover old, cracked tiles: the panels can often be fixed over sound, flat tiles, following the adhesive maker’s advice, saving the mess of stripping the wall.
Fire rating and peace of mind
The listing states that these panels are Class 1 fire rated, which is the surface spread of flame classification many homeowners look for when choosing wall linings. As with any PVC panel, keep them away from direct heat such as a gas hob or a wood burner.
Cutting around fittings
Mark the position of pipes, sockets and switches on the panel before you fit it, then drill holes with a hole saw or cut with a fine jigsaw blade. Seal around every pipe with silicone. Take your time with the first awkward panel; once you have one cut-out right, the rest of the wall goes up quickly.
At a glance
- 200mm x 2700mm x 5mm
- Black sparkle, two silver strips
- High gloss PVC
- Tongue and groove
- Class 1 fire rated
- No grout
Black Sparkle Silver Strip Panels questions
What size is each panel? 200mm wide, 2700mm long and 5mm thick.
How much does one panel cover? Each of the black sparkle silver strip panels covers 0.54 square metres.
How do the panels join? With a tongue and groove joint, with no grout.
Are they fire rated? Yes. The listing states they are Class 1 fire rated.
What is the finish? High gloss black with sparkle and two silver strips on each panel.
Can I cut them? Yes. Cut from the decorative face with a fine-toothed saw or a sharp knife.
How do I clean the black sparkle silver strip panels? Wipe with a soft, damp cloth and a little mild detergent. Avoid abrasive pads.
Looking for more like these panels? Browse the full Wet-wall Panels collection or the rest of the Kitchen Worktops shop. To learn more, see this overview of PVC.

















There are no reviews yet.